Bob Smith Industries Items



26 Results Found





Manufacturers
Categories
Scales
Insta-Cure+ Gap Filling CA 1 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Gap Filling CA 1 oz.

Part #: BOB-107

Bob Smith Industries 


Insta-Cure+ Gap Filling CA 1 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


IC-Gel Insta-Cure Gel 20 grams
Image displayed may not be
representative of actual product.


IC-Gel Insta-Cure Gel 20 grams

Part #: BOB-116

Bob Smith Industries 


IC-Gel Insta-Cure Gel 20 grams

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


Insta-Flex+ Clear Medium Rubber CA 1 oz.
Image displayed may not be
representative of actual product.


Insta-Flex+ Clear Medium Rubber CA 1 oz.

Part #: BOB-120

Bob Smith Industries 


Insta-Flex+ Clear Rubber CA 1 oz. Insta-Flex+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000™ that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+™ has this carbon removed, its strength is a little less than IC-2000™ but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+™ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX™ and INSTA-FLEX+™ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.

A Scale   |   Adhesives/Cleaners/Lubricants

$8.99

MSRP $8.99


Super-Gold+ Odorless CA 1/2 oz.
Image displayed may not be
representative of actual product.


Super-Gold+ Odorless CA 1/2 oz.

Part #: BOB-126

Bob Smith Industries 


Super-Gold+ Odorless CA 1/2 oz. SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

A Scale   |   Adhesives/Cleaners/Lubricants

$8.99

MSRP $8.99


Insta-Cure+ Pocket CA 3/4 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Pocket CA 3/4 oz.

Part #: BOB-133

Bob Smith Industries 


Insta-Cure+ Pocket CA 3/4 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$4.99

MSRP $4.99


Mid-Cure 15 Minute Epoxy 4.5 oz.
Image displayed may not be
representative of actual product.


Mid-Cure 15 Minute Epoxy 4.5 oz.

Part #: BOB-203

Bob Smith Industries 


Mid-Cure 15 Minute Epoxy 4.5 oz. MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Plastic-Cure Brush-On Gap Filling CA 1/2 oz.
Image displayed may not be
representative of actual product.


Plastic-Cure Brush-On Gap Filling CA 1/2 oz.

Part #: BOB-105

Bob Smith Industries 


Plastic-Cure Brush-On Gap Filling CA 1/2 oz. Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood, but its brush applicator at times will not be the best way to apply it. Plastic-Cure is superior for the application of false nails and wraps on fingernails, where its brush is the preferred method of application.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Maxi-Cure Gap Filling CA 1/2 oz.
Image displayed may not be
representative of actual product.


Maxi-Cure Gap Filling CA 1/2 oz.

Part #: BOB-111

Bob Smith Industries 


Maxi-Cure Gap Filling CA 1/2 oz. Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Maxi-Cure Gap Filling CA 2 oz.
Image displayed may not be
representative of actual product.


Maxi-Cure Gap Filling CA 2 oz.

Part #: BOB-113

Bob Smith Industries 


Maxi-Cure Gap Filling CA 2 oz. Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Super-Gold+ Pocket CA 3/4 oz.
Image displayed may not be
representative of actual product.


Super-Gold+ Pocket CA 3/4 oz.

Part #: BOB-139

Bob Smith Industries 


Super-Gold+ Pocket CA 3/4 oz. Odorless. SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

A Scale   |   Adhesives/Cleaners/Lubricants

$12.49

MSRP $12.49


Un-Cure CA Debonder 1 oz.
Image displayed may not be
representative of actual product.


Un-Cure CA Debonder 1 oz.

Part #: BOB-161

Bob Smith Industries 


Un-Cure CA Debonder 1 oz. UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Extra-Fine Glue Bottle Extender Tips 6/pk
Image displayed may not be
representative of actual product.


Extra-Fine Glue Bottle Extender Tips 6/pk

Part #: BOB-302

Bob Smith Industries 


Extra-Fine Glue Bottle Extender Tips. For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Insta-Cure+ Gap Filling CA 1/2 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Gap Filling CA 1/2 oz.

Part #: BOB-106

Bob Smith Industries 


Insta-Cure+ Gap Filling CA 1/2 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Super-Gold Thin Odorless CA 1/2 oz.
Image displayed may not be
representative of actual product.


Super-Gold Thin Odorless CA 1/2 oz.

Part #: BOB-121

Bob Smith Industries 


Super-Gold Thin Odorless 1/2 oz. SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

A Scale   |   Adhesives/Cleaners/Lubricants

$8.99

MSRP $8.99


Insta-Set CA Accelerator 2 oz.
Image displayed may not be
representative of actual product.


Insta-Set CA Accelerator 2 oz.

Part #: BOB-151

Bob Smith Industries 


Insta-Set CA Accelerator 2 oz. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


Insta-Cure Super Thin CA 1/2 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 1/2 oz

Part #: BOB-101

Bob Smith Industries 


Insta-Cure Super Thin CA 1/2 oz. Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Insta-Cure Super Thin CA 1 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 1 oz

Part #: BOB-102

Bob Smith Industries 


Insta-Cure Super Thin CA 1 oz. Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


Insta-Cure Super Thin CA 2 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 2 oz

Part #: BOB-103

Bob Smith Industries 


Insta-Cure Super Thin CA 2 oz. Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Insta-Cure+ Gap Filling CA 2 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Gap Filling CA 2 oz.

Part #: BOB-108

Bob Smith Industries 


Insta-Cure+ Gap Filling CA 2 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Maxi-Cure Gap Filling CA 1 oz.
Image displayed may not be
representative of actual product.


Maxi-Cure Gap Filling CA 1 oz.

Part #: BOB-112

Bob Smith Industries 


Maxi-Cure Gap Filling CA 1 oz. Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


IC-2000 Rubber-Toughened CA 1 oz.
Image displayed may not be
representative of actual product.


IC-2000 Rubber-Toughened CA 1 oz.

Part #: BOB-118

Bob Smith Industries 


IC-2000 Rubber-Toughened CA 1 oz. IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires. IC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Insta-Flex Flexible Thin 1 oz.
Image displayed may not be
representative of actual product.


Insta-Flex Flexible Thin 1 oz.

Part #: BOB-119

Bob Smith Industries 


Insta-Flex Flexible Thin 1 oz. nsta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE™, INSTA-FLEX™ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1/16" hole in the center of the hinge slots to insure the complete saturation of the hinge when INSTA-FLEX™ is applied. INSTA-FLEX™ has a different, less irritating odor compared to regular CA's, but still can not be used on white foam. INSTA-FLEX™ has also proven to be superior when bonding anodized aluminum.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Slow-Cure 30 Minute Epoxy 4.5 oz.
Image displayed may not be
representative of actual product.


Slow-Cure 30 Minute Epoxy 4.5 oz.

Part #: BOB-205

Bob Smith Industries 


Slow-Cure 30 Minute Epoxy 4.5 oz. SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Insta-Set CA Accelerator 8 oz.
Image displayed may not be
representative of actual product.


Insta-Set CA Accelerator 8 oz.

Part #: BOB-152

Bob Smith Industries 


Insta-Set CA Accelerator 8 oz. Refill. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

A Scale   |   Adhesives/Cleaners/Lubricants

$11.99

MSRP $11.99


Quik-Cure 5 Minute Epoxy 4.5 oz.
Image displayed may not be
representative of actual product.


Quik-Cure 5 Minute Epoxy 4.5 oz.

Part #: BOB-201

Bob Smith Industries 


Quik-Cure 5 Minute Epoxy 4.5 oz. QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Glue Bottle Extender Tips 6/pk
Image displayed may not be
representative of actual product.


Glue Bottle Extender Tips 6/pk

Part #: BOB-301

Bob Smith Industries 


Glue Bottle Extender Tips 6/pk. For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.

A Scale   |   Adhesives/Cleaners/Lubricants

$1.99

MSRP $1.99