Gyros Precision Tools Inc. Items

1 2 3 5



209 Results Found





Manufacturers
Categories
Scales
Tiny Tinsnip
Image displayed may not be
representative of actual product.


Tiny Tinsnip

Part #: 321-7301830

Gyros Precision Tools Inc. 


Tiny Tinsnip. Stainless Steel One Serrated Jaw 4-1/2" Long This handy tool cuts jewelry and electronic wire. Slices through copper, soft chain, .032 (20ga.) brass sheet. Only 4-1/2" long, but with powerful leverage. A must-have for all tiny projects. One serrated Jaw.

A Scale   |   Tools

$8.60


High Speed Steel Drill #51, 2 pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #51, 2 pack

Part #: 321-4520251

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #51 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$3.80

MSRP $3.80


High Speed Steel Drill #61, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #61, 2 Pack

Part #: 321-4520261

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #61 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.10

MSRP $4.10


High Speed Steel Drill #65, 2 pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #65, 2 pack

Part #: 321-4520265

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #65 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.10

MSRP $4.10


High Speed Steel Drill #68, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #68, 2 Pack

Part #: 321-4520268

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #68 Card of 2 Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.10

MSRP $4.10


High Speed Steel Drill #70, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #70, 2 Pack

Part #: 321-4520270

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #70 Card of 2 Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.10

MSRP $4.10


High Speed Steel Drill #75, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #75, 2 Pack

Part #: 321-4520275

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #75 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.80

MSRP $4.80


High Speed Steel Drill #77, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #77, 2 Pack

Part #: 321-4520277

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #77 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.80

MSRP $4.80


High Speed Steel Drill #79, 2 pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #79, 2 pack

Part #: 321-4520279

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #79 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.80

MSRP $4.80


High Speed Steel Drill #57, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill #57, 2 Pack

Part #: 3214520257

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #57 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$3.80


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/4 x 3/4"
Image displayed may not be
representative of actual product.


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/4 x 3/4"

Part #: 321-1112007

Gyros Precision Tools Inc. 


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/4 x 3/4". 3/4" x 3/4" Mounted Wheels 1/8" shanks 120 Grit Aluminum oxide resin bonded and mounted on 1/8" shanks, these wheels are used for sanding and general clean-up of irregular or curved sections of wood, metal and fiberglass. Self conforming on any shape or surface. Ideal for hard to finish sharp corners, narrow channels, round concave or convex areas. Long lasting. Non-loading. As these flaps wear, new abrasive is constantly being exposed. Excellent alternative to wire wheel brushes, grit-impregnated nylon brushes, and fibrous wheels, all of which become less efficient with use. Available in grits 80,120,180 and 240 for fine finishing.

A Scale   |   Tools

$7.80


180 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8"
Image displayed may not be
representative of actual product.


180 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8"

Part #: 321-1118003

Gyros Precision Tools Inc. 


180 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8" 3/8" x 3/8" Mounted Wheels 1/8" shanks 180 Grit Aluminum oxide resin bonded and mounted on 1/8" shanks, these wheels are used for sanding and general clean-up of irregular or curved sections of wood, metal and fiberglass. Self conforming on any shape or surface. Ideal for hard to finish sharp corners, narrow channels, round concave or convex areas. Long lasting. Non-loading. As these flaps wear, new abrasive is constantly being exposed. Excellent alternative to wire wheel brushes, grit-impregnated nylon brushes, and fibrous wheels, all of which become less efficient with use. Available in grits 80,120,180 and 240 for fine finishing.

A Scale   |   Tools

$7.80


Saw Blade Fine 7/8"diameter
Image displayed may not be
representative of actual product.


Saw Blade Fine 7/8"diameter

Part #: 321-8110815

Gyros Precision Tools Inc. 


Saw Blade -- Fine, 7/8" Diameter, 80 Teeth 7/8" Diameter .015" Thickness 1/8" Center Hole 80 Teeth Maximum Speed: 35,000 RPM Pack Contains: (1) Blade, (2) Washers Use Mandrel # 80-18100 These FINE-TEETH blades precisely and accurately cut wood, plastic and soft metals such as brass, aluminum and copper. They are ideal tools for limitless cutting projects, are compatible with other Dremel® tool accessories and they produce a clean finished cut - virtually eliminating any further finishing operations. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories

A Scale   |   Tools

$15.60


Sanding Bands Medium Grit -- 1/2" Diameter, 6 pack
Image displayed may not be
representative of actual product.


Sanding Bands Medium Grit -- 1/2" Diameter, 6 pack

Part #: 321-11840856

Gyros Precision Tools Inc. 


Sanding Bands Medium Grit -- 1/2" Diameter

A Scale   |   Tools

$2.55


Sanding Bands Medium Grit -- 1/4" Diameter, 300 pack
Image displayed may not be
representative of actual product.


Sanding Bands Medium Grit -- 1/4" Diameter, 300 pack

Part #: 321-11840863

Gyros Precision Tools Inc. 


Sanding Bands Medium Grit -- 1/4" Diameter

A Scale   |   Tools

$52.41


8 Piece Fiber Disk Pro Pak
Image displayed may not be
representative of actual product.


8 Piece Fiber Disk Pro Pak

Part #: 321-6111808

Gyros Precision Tools Inc. 


8-Piece Pro Pak Tool Set -- 7 Fiber Disks,1 Mandrel. Our 8 Piece Cut-Off Wheels Fiber Disk ProPak kits have been designed to work in conjunction with Dremel type motor tools and with our GyrosGuard Safety Shields. These kits provide you with all three formulations of our Fiber Disks in an array of sizes - all in one convenient package. The multi-purpose combinations, combined with the GyrosGuard Safety Shields, provide quick and easy choices with proven performance. This Set Includes: (1) Fiber Disk LT, 1" Diameter (1) Fiber Disk LT, 1-1/2" Diameter (1) Fiber Disk LT, 1-3/4" Diameter (1) Fiber Disk HT, 1-1/2" Diameter (1) Fiber Disk HT, 1-3/4" Diameter (1) Fiber Disk ST, 1-1/2" Diameter (1) Fiber Disk ST, 1-3/4" Diameter (1) Mandrel, 1/8" Shank - Fits 1/8" Arbor Holes (#80-18100) For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

A Scale   |   Tools

$24.05


Carbon Drill #73, 2 Pieces
Image displayed may not be
representative of actual product.


Carbon Drill #73, 2 Pieces

Part #: 321-4510273

Gyros Precision Tools Inc. 


Carbon Drill Bits -- #73 Card of 2 Gyros Carbon Steel Drills are flexible, extremely sharp and economically priced. They are ideal for drilling wood and plastic. These drills can be used in hand and motorized tools.

A Scale   |   Tools

$3.60


High Speed Steel Drill Bits #78, 2 Pack
Image displayed may not be
representative of actual product.


High Speed Steel Drill Bits #78, 2 Pack

Part #: 321-4520278

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #78 Card of 2 Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$4.80


Swivel Head Pin Vise
Image displayed may not be
representative of actual product.


Swivel Head Pin Vise

Part #: 321-9701818

Gyros Precision Tools Inc. 


Swivel Head Pin Vise. 3-5/8" Long 5/16" Barrel Diameter 2 Collets 0" to 1/8" Collet Capacities The Gyros Swivel Head Pin Vise is used for holding tiny drill bits, taps, reamers, cutters/routers, pins, scribing/etching needles, wire, screws, wooden polishing sticks. It's uses are endless. Two double-ended collets are conveniently stored in the barrel when not in use.

A Scale   |   Tools

$11.50


Watchmaker Tweezer Straight
Image displayed may not be
representative of actual product.


Watchmaker Tweezer Straight

Part #: 321-9501741

Gyros Precision Tools Inc. 


Watchmakers Tweezers -- Straight. Stainless Steel 4-5/8" Long Swiss Style Straight Fine Points Fine quality tweezers to grasp, position and manipulate the smallest of items. Used by electronic assemblers, jewelers, watchmakers, computer and other professionals.

A Scale   |   Tools

$8.00


High-Speed Steel Drill Bits -- #50, 2 pack
Image displayed may not be
representative of actual product.


High-Speed Steel Drill Bits -- #50, 2 pack

Part #: 321-4520250

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bits -- #50 Card of 2. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools.

A Scale   |   Tools

$3.80


Cut Off Wheels - Fiber Disks HT, 2-1/2" Dia. - Set of 2
Image displayed may not be
representative of actual product.


Cut Off Wheels - Fiber Disks HT, 2-1/2" Dia. - Set of 2

Part #: 321-1132250

Gyros Precision Tools Inc. 


Fiber Disc High Tensile -- 2-1/2 x 1/32 x 1/4" Hole. 2-1/2" Diameter 1/32" Thickness 1/4" Center Hole Maximum Speed: 26,000 RPM Package Includes - (2) Fiber Disks & (2) Washers Use with Mandrel # 80-18105 The Gyros Fiber Disks HT are abrasive cut off wheels specifically formulated to cleanly and smoothly cut High Tensile-Strength materials such as hardened and unhardened steels, steel alloys, hard bronze, etc. Sharp cutting action produces a clean, smooth finish. The fiberglass-reinforced structure gives our cut off wheels unsurpassed strength and flexibility making them long lasting and resistant to breakage. Designed specifically for use in all motorized rotating hand tools, our ultra sharp abrasive wheels optimize the low torque supplied by those tools found in just about every tool box. These abrasive grinding wheels will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

A Scale   |   Tools

$6.95


240 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8"
Image displayed may not be
representative of actual product.


240 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8"

Part #: 321-1124003

Gyros Precision Tools Inc. 


240 Grit Aluminum Oxide Abrasive Flap Wheel -- 3/8 x 3/8". 3/8" x 3/8" Mounted Wheels 1/8" shanks 240 Grit Aluminum oxide resin bonded and mounted on 1/8" shanks, these wheels are used for sanding and general clean-up of irregular or curved sections of wood, metal and fiberglass. Self conforming on any shape or surface. Ideal for hard to finish sharp corners, narrow channels, round concave or convex areas. Long lasting. Non-loading. As these flaps wear, new abrasive is constantly being exposed. Excellent alternative to wire wheel brushes, grit-impregnated nylon brushes, and fibrous wheels, all of which become less efficient with use. Available in grits 80,120,180 and 240 for fine finishing.

A Scale   |   Tools

$7.90


Mounted Brass Wire Wheel -- 1" Diameter
Image displayed may not be
representative of actual product.


Mounted Brass Wire Wheel -- 1" Diameter

Part #: 321-1184287

Gyros Precision Tools Inc. 


Mounted Brass Wire Wheel -- 1" Diameter

A Scale   |   Tools

$3.90


Flp Whl 1-1/4x1/4x180 Grt
Image displayed may not be
representative of actual product.


Flp Whl 1-1/4x1/4x180 Grt

Part #: 321-1194201

Gyros Precision Tools Inc. 


Flap Wheel -- 1-1/4 x 1/4 x 180 Grit

A Scale   |   Tools

$8.25


Economy File 5.5" Knife
Image displayed may not be
representative of actual product.


Economy File 5.5" Knife

Part #: 321-4901261

Gyros Precision Tools Inc. 


Economy File -- 5.5" Knife. 5-1/2" Long Double Cut Swiss Cut #2 Rubber Grip Handle Commercial Quality Our double cut Knife-Edge needle files are used for plunge cutting and filing of narrow spaces. Comfortable rubber gripper handle, for easy gripping. For wood, plastic and soft metals

A Scale   |   Tools

$1.58


HSS Cutter Set 10 pieces
Image displayed may not be
representative of actual product.


HSS Cutter Set 10 pieces

Part #: 321-4692012

Gyros Precision Tools Inc. 


High-Speed Steel Cutters -- Cutter Set Titanium Coated 1/8" Shank 10 Pieces. High Speed Steel Cutter Set TiN Coated 1/8" Shanks 10 Piece Set Our 10 piece High Speed Cutter set contains a complete assortment of many of the shapes you will need for most projects. They all have 1/8" shanks, and are TiN coated for extended tool life. They are used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. All cutters have 1/8" shanks to fit *Dremel® and most other rotary tools. Set comes packaged in a handy compact container, perfect for tool box storage. Shapes included in this set: Cylindrical, 1/8" dia. Cylindrical, 5/16" dia. Ball, 1/8" dia. Ball, 5/16" dia. Tapered Radius, 1/4" dia. Oval, 1/4" dia. Wheel, 3/8" dia. Flame, 1/4" dia. Inverted Taper, 1/4" dia. Cone, 1/4" dia. *Dremel® is a registered trademark of the Robert Bosch Tool Corp.

A Scale   |   Tools

$32.80


Economy File 5.5" Square 6 pack
Image displayed may not be
representative of actual product.


Economy File 5.5" Square 6 pack

Part #: 321-4901263

Gyros Precision Tools Inc. 


Enconomy File -- 5.5" Square, 6 pack

A Scale   |   Tools

$8.00


Saw Blade Coarse 3/4"diameter
Image displayed may not be
representative of actual product.


Saw Blade Coarse 3/4"diameter

Part #: 321-8120715

Gyros Precision Tools Inc. 


Saw Blade -- Coarse, 3/4" Diameter, 36 Teeth 3/4" Diameter .015" Thickness 1/8" Center Hole 36 Teeth Maximum Speed: 35,000 RPM Pack Contains: 1 Saw Blade Used with Mandrel # 80-18100 These COARSE-TEETH blades offer fast cutting on soft woods such as balsa, cedar, pine and basswood, as well as hard woods, and plastic. Also great for paraffin and wax. These are ideal cross cut saws. They are ideal woodworking tools for limitless wood cutting projects, are compatible with other Dremel® tool accessories and they produce a clean finished cut - virtually eliminating any further finishing operations. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

A Scale   |   Tools

$15.05


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 5/8 x 5/8"
Image displayed may not be
representative of actual product.


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 5/8 x 5/8"

Part #: 321-1112005

Gyros Precision Tools Inc. 


120 Grit Aluminum Oxide Abrasive Flap Wheel -- 5/8 x 5/8" 5/8" x 5/8" Mounted Wheels 1/8" shanks 120 Grit Aluminum oxide resin bonded and mounted on 1/8" shanks, these wheels are used for sanding and general clean-up of irregular or curved sections of wood, metal and fiberglass. Self conforming on any shape or surface. Ideal for hard to finish sharp corners, narrow channels, round concave or convex areas. Long lasting. Non-loading. As these flaps wear, new abrasive is constantly being exposed. Excellent alternative to wire wheel brushes, grit-impregnated nylon brushes, and fibrous wheels, all of which become less efficient with use. Available in grits 80,120,180 and 240 for fine finishing.

A Scale   |   Tools

$7.70


Riffler File Set 6 pack
Image displayed may not be
representative of actual product.


Riffler File Set 6 pack

Part #: 321-4901488

Gyros Precision Tools Inc. 


Riffler Set -- 6-Piece Set, Single & Double Cut

A Scale   |   Tools

$34.10


HSS Router Set 10 pieces
Image displayed may not be
representative of actual product.


HSS Router Set 10 pieces

Part #: 321-4692010

Gyros Precision Tools Inc. 


High-Speed Steel Cutters -- Router Set Titanium Coated 1/8" Shank 10 Pieces. Router Bit Set TiN Coated 1/8" Shanks 10 Piece Set Our High Speed Steel Router set contains ten of our most popular shapes. They all have 1/8" shanks, and are Titanium Nitride (TiN) coated for extended tool life. Router bits are used for routing, inlaying, mortising in wood and other soft materials. Puts a decorative edge on wood and for making miniature molding. All router bits have 1/8" shanks to fit *Dremel® and most other rotary tools. Use with drill press or rotary tools with router attachment. Set comes packaged in a handy compact container, perfect for tool box storage. Shapes included in this set: Beading, 1/4" dia. Veining, 1/4" dia. V-Groove, 1/4" dia. Straight, 1/8" dia. Straight, 3/16" dia. Straight, 1/4" dia. Piloted Beading, 3/32" dia. Piloted Cove, 3/16" dia. Piloted Rabbeting, 1/8" dia. Piloted Corner Rounding, 1/8" dia. *Dremel® is a registered trademark of the Robert Bosch Tool Corp.

A Scale   |   Tools

$45.55


Economy File 5.5" Flat
Image displayed may not be
representative of actual product.


Economy File 5.5" Flat

Part #: 321-4901266

Gyros Precision Tools Inc. 


Economy File -- 5.5" Flat. 5-1/2" Long Double Cut Swiss Cut #2 Rubber Grip Handle Commercial Quality Our double cut Flat needle files are used for flat filing of small or intricate shapes and deep slotting. It's thin edges are single cut. Comfortable rubber gripper handle, for easy gripping. For wood, plastic and soft metals.

A Scale   |   Tools

$1.58


Fiber Disc Low Tensile -- 1 x 1/32 x 1/8" Hole
Image displayed may not be
representative of actual product.


Fiber Disc Low Tensile -- 1 x 1/32 x 1/8" Hole

Part #: 321-1132102

Gyros Precision Tools Inc. 


Fiber Disc Low Tensile -- 1 x 1/32 x 1/8" Hole. 1" Diameter 1/32" Thickness 1/8" Center Hole Maximum Speed: 61,116 RPM Package Includes - (2) Fiber Disks & (2) Washers Use with Mandrel # 80-18100 The Gyros Fiber Disks LT are abrasive cut off wheels specifically formulated to cleanly and smoothly cut Low Tensile Strength materials such as glass, plastic, stone, ceramic, wood, aluminum, copper, brass, etc. The fiberglass-reinforced structure gives our cut off wheels unsurpassed strength and flexibility making them long lasting and resistant to breakage. Designed specifically for use in all motorized rotating hand tools, our ultra sharp abrasive wheels optimize the low torque supplied by those tools found in just about every tool box. These abrasive grinding wheels will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

A Scale   |   Tools

$4.35


Sanding Bands Medium Grit -- 1/2" Diameter, 300 pack
Image displayed may not be
representative of actual product.


Sanding Bands Medium Grit -- 1/2" Diameter, 300 pack

Part #: 321-11840853

Gyros Precision Tools Inc. 


Sanding Bands Medium Grit -- 1/2" Diameter

A Scale   |   Tools

$52.41


Tungston Steel Tap #2-56
Image displayed may not be
representative of actual product.


Tungston Steel Tap #2-56

Part #: 321-9110256

Gyros Precision Tools Inc. 


Tungsten Steel Tap -- #2-56 Size 2-56 High Speed Steel Plug Used for putting threads in a hole made with a a tap drill. Can be used for a wide range of materials such as low carbon steels, stainless steel, copper, brass, aluminum and plastics.

A Scale   |   Tools

$5.95


Sanding Bands Medium Grit -- 1/4" Diameter, 6 pack
Image displayed may not be
representative of actual product.


Sanding Bands Medium Grit -- 1/4" Diameter, 6 pack

Part #: 321-11840866

Gyros Precision Tools Inc. 


Sanding Bands Medium Grit -- 1/4" Diameter

A Scale   |   Tools

$2.55


High-Speed Steel Drill Bit Set -- Metal Storage Box w/#61-80 Bits
Image displayed may not be
representative of actual product.


High-Speed Steel Drill Bit Set -- Metal Storage Box w/#61-80 Bits

Part #: 321-4522020

Gyros Precision Tools Inc. 


High-Speed Steel Drill Bit Set -- Metal Storage Box w/#61-80 Bits. Gyros High Speed Steel Drills are tough, sharp and will stand up to heavy, high RPM usage with very little wear. This makes them ideal for metal and deep hole drilling. They can be used in hand and motorized tools. They can be used up to 30,000 RPM.

A Scale   |   Tools

$29.20


Saw Blade Coarse 1"diameter
Image displayed may not be
representative of actual product.


Saw Blade Coarse 1"diameter

Part #: 321-8121015

Gyros Precision Tools Inc. 


Saw Blade -- Coarse, 1" Diameter, 34 Teeth. 1" Diameter .015" Thickness 1/8" Center Hole 34 Teeth Maximum Speed: 35,000 RPM Pack Contains: 1 Saw Blade Used with Mandrel # 80-18100 These COARSE-TEETH blades offer fast cutting on soft woods such as balsa, cedar, pine and basswood, as well as hard woods, and plastic. Also great for paraffin and wax. These are ideal cross cut saws. They are ideal woodworking tools for limitless wood cutting projects, are compatible with other Dremel® tool accessories and they produce a clean finished cut - virtually eliminating any further finishing operations. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories

A Scale   |   Tools

$16.25


Carbon Drill #64, 2 Pieces
Image displayed may not be
representative of actual product.


Carbon Drill #64, 2 Pieces

Part #: 321-4510264

Gyros Precision Tools Inc. 


Carbon Drill Bits -- #64 Card of 2 Gyros Carbon Steel Drills are flexible, extremely sharp and economically priced. They are ideal for drilling wood and plastic. These drills can be used in hand and motorized tools.

A Scale   |   Tools

$3.60


1 2 3 5