G R S Micro Liting Items

2 >



64 Results Found





Manufacturers
Categories
Scales
Old Time Gas Street Light
Image displayed may not be
representative of actual product.


Old Time Gas Street Light

Part #: 296-303

G-R-S Micro Liting 


Street Light Kit -- Oldtyme Gas. The GRS303 consists of a clear 1.5V micro bulb, a 1-1/2" X 1/16" dia. brass tubing piece, a tapered transparent lens, a plastic cap, and instructions. Installed in the same manner as the GRS302. The lens, with black cap measures 3/8" high and is 3/16" square at the top. Use on all HO through S scales.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$11.95


Red Rotating Beacon
Image displayed may not be
representative of actual product.


Red Rotating Beacon

Part #: 296-1005

G-R-S Micro Liting 


Vehicle Lighting Kit -- Rotating Beacon (red) Our special effects lighting kits are just the thing to make your layout, model vehicle or locomotive come alive. Our "gumball" beacons also look absolutely awesome when installed in static model aircraft and boats. The 1" X 1" circuit board used to create the effects can be easily mounted under the layout near the vehicle, structure or device to be controlled. Its small size permits easy installation not only under a R/R layout but "on board" a train as well. For model cars, the circuit board may be mounted inside the model supporting case. Each of these devices can be powered with 6-20 volts ac or dc from track power or 12 vac from a Cir-Kit Concepts CK1009B transformer. For short durations, such as in model or diorama contests, a common 9-volt transistor battery can provide power for up to two hours. All come with complete installation instructions. Small Scale Beacons The HO and N scale GRS1005 rotating beacons are each equipped with a tin-plated motor housing and a colored 1.5 volt micro bulb. Normal bulb brightness punctuated by high intensity flashes every second gives an extremely realistic rotating appearance.

HO Scale   |   DCC/Power Supplies/Signals/Electronics

$31.95


Microlamp 3v flame
Image displayed may not be
representative of actual product.


Microlamp 3v flame

Part #: 296-503

G-R-S Micro Liting 


High-Intensity 3V Super Microlamps -- Flame GOR bulbs are some of the highest quality bulbs of their size in the industry. Specifications: 1.5V (35ma), 3.0V (40ma.), 0.092" dia., 8" insulated leads, 5,000 hr. life. The insulated leads measure a mere .018" in diameter and the insulation at the base of the bulb is half the diameter of the bulb.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$2.48


Super Flamemaker
Image displayed may not be
representative of actual product.


Super Flamemaker

Part #: 296-1004

G-R-S Micro Liting 


Super Flamemaker. Our GRS1004 Super Flamemaker realistically simulates larger fires such as a burning structure or working blast furnace. The increased level of light required is achieved through the use of a large 7/8" long x 3/16" diameter high-intensity bulb. Use on all scales. For best results use ac power between 16 and 20 volts such as that available from the accessory terminals of a train power pak.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$31.95


2-Pin Micro Connector -- Less Leads 2 pack
Image displayed may not be
representative of actual product.


2-Pin Micro Connector -- Less Leads 2 pack

Part #: 296-907

G-R-S Micro Liting 


2-Pin Micro Connector -- Less Leads without wires. Makes either a male or female connector. Insulating heat shrink tubing pieces included. Excellent for wire interconnects in tight places. Gold plated.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$5.95


Emergency Vehicle Lighting Units -- "Gumball" Rotating Beacon w/3.0V Amber Bulb
Image displayed may not be
representative of actual product.


Emergency Vehicle Lighting Units -- "Gumball" Rotating Beacon w/3.0V Amber Bulb

Part #: 296-10111

G-R-S Micro Liting 


Emergency Vehicle Lighting Units -- "Gumball" Rotating Beacon w/3.0V Amber Bulb The special electronics in our "gumball" beacons create an impression that they are actually rotating. These devices are not merely flashers, but display brilliant prototypical type action that must be seen to be appreciated. This unit has been developed primarily for the larger S,O and G scale train layouts and for 1/18 and 1/25 scale cars. Both versions are equipped with a tin-plated motor housing and a larger 3.0 volt GOR bulb that closely replicates these scales. Normal bulb brightness punctuated by high intensity flashes every 1 1/2 seconds gives an extremely realistic rotating appearance.

G Scale   |   DCC/Power Supplies/Signals/Electronics

$27.50


Litepac 1.5v
Image displayed may not be
representative of actual product.


Litepac 1.5v

Part #: 296-125

G-R-S Micro Liting 


GRS125 1.5V - Litepac Converter/Regulator The GRS125 regulator will convert a 4-20 volt ac input into a steady 1.45 volt dc output capable of powering 25 or more 1.5 volt, 15 ma micro bulbs on a layout or in a diorama. Measures 3-1/2" X 2" X 3/4"H Unlike ac transformers, our Litepacs provide a fully regulated and filtered dc output that can actually EXTEND bulb life by 50% or more. A "lamp saver" circuit helps prevent harmful ac line surges or spikes form destroying delicate 1.5 volt micro bulbs. The unit will shut down in the event of an overload, overheating or excessive current draw. Comes fully assembled with instructions and mounting hardware.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$39.95


Super MicroLamp 1.5v Flame
Image displayed may not be
representative of actual product.


Super MicroLamp 1.5v Flame

Part #: 296-104

G-R-S Micro Liting 


Super Microbulb 1.5V, 15mA, 1.4mm Diameter -- Flame Even though competitively priced, we feel these are the best quality "hobby grade" micro bulbs available. Each is hand selected, pre-aged and tested before being packaged as a super micro bulb. Specifications: 1.5V, 15ma, 1.4mm dia., 8” insulated leads and 1,000 hr. life.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$2.48


3.0V red Super GOR Bulb
Image displayed may not be
representative of actual product.


3.0V red Super GOR Bulb

Part #: 296-506

G-R-S Micro Liting 


3.0 Volt Super Grain of Rice Bulb -- Red Specifications: 1.5V (35ma), 3.0V (40ma.), 0.092" dia., 8" insulated leads, 5,000 hr. life. The insulated leads measure a mere .018" in diameter and the insulation at the base of the bulb is half the diameter of the bulb.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$2.48


Large Scale Locolite -- Constant Headlight, Auto Reverse.
Image displayed may not be
representative of actual product.


Large Scale Locolite -- Constant Headlight, Auto Reverse.

Part #: 296-904

G-R-S Micro Liting 


Large Scale Locolite -- Constant Headlight, Auto Reverse. The GRS903, 904, and 905 perform the same function as the respective GRS900, 901 and 902 modules, except for the heavier components incorporated to accommodate the larger current draws. Each package contains two micro-connectors for interconnecting the bulbs to the locolite module. No bulbs are included, but the GRS505 1.5V GOR bulb provides an excellent light source for these larger scale locomotives.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$15.95


3.0V Gmbll Rttng Bcn red
Image displayed may not be
representative of actual product.


3.0V Gmbll Rttng Bcn red

Part #: 296-10051

G-R-S Micro Liting 


3.0V Gumball Rotating Beacon -- Red The special electronics in our "gumball" beacons create an impression that they are actually rotating. These devices are not merely flashers, but display brilliant prototypical type action that must be seen to be appreciated. This unit has been developed primarily for the larger S,O and G scale train layouts and for 1/18 and 1/25 scale cars. Both versions are equipped with a tin-plated motor housing and a larger 3.0 volt GOR bulb that closely replicates these scales. Normal bulb brightness punctuated by high intensity flashes every 1 1/2 seconds gives an extremely realistic rotating appearance.

G Scale   |   DCC/Power Supplies/Signals/Electronics

$27.50


Micro Motor Controller
Image displayed may not be
representative of actual product.


Micro Motor Controller

Part #: 296-601

G-R-S Micro Liting 


Micro Motor Controller. Our GRS601 controller has been designed for our GRS600 Micro Motor but will work on any 1.5-3.0 volt hobby motor drawing up to 300ma of current. The controller uses pulse modulation to create a wide range of motor speeds. It also incorporates thermal limiting to prevent damage to the unit in the event of a shorted or stalled motor.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$41.95


Fast MicroFlasher Red/Amb
Image displayed may not be
representative of actual product.


Fast MicroFlasher Red/Amb

Part #: 296-10021

G-R-S Micro Liting 


Micro Flasher, Fast -- 1 Red Bulb & 1 Amber Bulb. The GRS1002 Small Scale Fast Flasher is basically the same as the preceeding GRS1001 but with a faster flash rate of 1 second on and 0.5 second off. This approximates the speed of turn signals, traffic lights and road signals.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$27.50


Lamp Holder for Heavy-Duty Fluorette Lamps
Image displayed may not be
representative of actual product.


Lamp Holder for Heavy-Duty Fluorette Lamps

Part #: 296-402

G-R-S Micro Liting 


Heavy-Duty Fluorette Lamps -- Lamp Holder. These sockets are designed specifically for the GRS400 bulbs. The clip-in feature allows simple bulb installation and replacement. Equipped with solder eyes for wire attachment.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$3.48


Replacement bulb 900-902
Image displayed may not be
representative of actual product.


Replacement bulb 900-902

Part #: 296-908

G-R-S Micro Liting 


Replacement Bulb -- For Constant Lighting Modules #296-900 thru 902, Each Sold Separately

A Scale   |   DCC/Power Supplies/Signals/Electronics

$2.49


Holder for Heavy-Duty Fluorette Lamps 6 Pack
Image displayed may not be
representative of actual product.


Holder for Heavy-Duty Fluorette Lamps 6 Pack

Part #: 296-403

G-R-S Micro Liting 


Heavy-Duty Fluorette Lamps -- Lamp Holder pkg(6). These sockets are designed specifically for the GRS400 bulbs. The clip-in feature allows simple bulb installation and replacement. Equipped with solder eyes for wire attachment.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$18.80


Hobo camp w/working fire
Image displayed may not be
representative of actual product.


Hobo camp w/working fire

Part #: 296-2000

G-R-S Micro Liting 


Miniature Scene -- Hobo Camp w/Working Fire. In the past, hobo camps were seen on virtually all North American railroads, and some can be found even today. They were usually established under bridges or in ravines on the edge of towns. This quality kit comes complete with an unpainted, highly detailed scene casting, hobo accessories, painted figures and, to create a very realistic campfire, one of our exclusive GRS1000 Micro Flamemakers. Enhance your layout with a genuine piece of "Americana" that includes...Action! To complete, paint in accordance with the enclosed instructions, decorate the casting to your taste, cut a 2-1/2" X 2-1/2" square out of the layout, and insert in place. Apply voltage to the Flamemaker and watch your scene come to life. HO scale. Requires 6-20 volts ac or dc for Flamemaker operation.

HO Scale   |   Scenery

$59.95


Microstrobe 6-20v
Image displayed may not be
representative of actual product.


Microstrobe 6-20v

Part #: 296-1003

G-R-S Micro Liting 


Micro Strobe. The GRS1003 Small Scale Strobe is basically the same as the GRS1001 Slow Flasher but with a short strobe - like flash every two seconds. The strobe effect is enhanced by the inclusion of two lightly tinted blue micro bulbs that provide a very realistic, pure white-light output. Use as tower warning lights, or as strobes on HO and N scale aircraft, fire trucks, ambulances, police cars and warehouse vehicles.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$27.50


GRS Model Railroad Electrical Catalog
Image displayed may not be
representative of actual product.


GRS Model Railroad Electrical Catalog

Part #: 296-1

G-R-S Micro Liting 


Catalog -- Model Railroad Electrical Catalog This 18 page catalog provides color photos, descriptions and prices for all GRS products.

A Scale   |   Books/Videos/Artwork/Railroadiana

$3.00

MSRP $3.00


3.0V Hdlght/Tllght Kit
Image displayed may not be
representative of actual product.


3.0V Hdlght/Tllght Kit

Part #: 296-10121

G-R-S Micro Liting 


3.0V Vehicle Headlight/Taillight Lighting Kit -- w/2 Clear & 2 Red Grain of Rice Bulbs (1/18 & 1/25 Scales) The GRS1012-1 kit is equipped with two clear GRS504 and two red GRS506 GOR 3.0V bulbs for use as headlights and taillights in 1/18 and 1/25 scale vehicles. Kit comes with A terminal strip and 24" of wire are provided for hookup to a 1.5 volt power supply. Complete installation instructions provided.

G Scale   |   DCC/Power Supplies/Signals/Electronics

$12.95


Alternating Crossbuck Flashers -- For G Scale
Image displayed may not be
representative of actual product.


Alternating Crossbuck Flashers -- For G Scale

Part #: 296-10061

G-R-S Micro Liting 


Alternating Crossbuck Flashers -- For G Scale - w/4 Red 1.5V Grain of Rice Bulbs The GRS1006-1 Large Scale Alternating Crossbuck Flasher has larger 1.5V GOR bulbs for larger scale crossbucks. Comes with four red bulbs, one set for each signal post. Complete instructions are included showing how the bulbs are interconnected between the circuit board and signal posts.

G Scale   |   DCC/Power Supplies/Signals/Electronics

$29.50


Basic Vehicle Liting kit
Image displayed may not be
representative of actual product.


Basic Vehicle Liting kit

Part #: 296-1012

G-R-S Micro Liting 


Vehicle Lighting Kit -- Basic Vehicle Lighting Kit. The GRS1012 kit comes with two 1.5V clear micro bulbs and two plated headlamp housings for use as headlights in N thru O scale vehicles. It also contains two 1.5V red micro bulbs for use as taillights. Simply drill into front and rear lenses from inside and glue bulbs into place. A terminal strip and 24" of wire are provided for hookup to a 1.5 volt power supply. Complete installation instructions provided.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$17.95


Amber Rotating Beacon
Image displayed may not be
representative of actual product.


Amber Rotating Beacon

Part #: 296-1011

G-R-S Micro Liting 


Vehicle Lighting Kit -- Rotating Beacon (amber) ROTATING BEACONS The special electronics in our "gumball" beacons create an impression that they are actually rotating. These devices are not merely flashers, but display brilliant prototypical type action that must be seen to be appreciated. GRS1011-1 micro liting devices have been developed primarily for the larger S,O and G scale train layouts and for 1/18 and 1/25 scale cars. Both versions are equipped with a tin-plated motor housing and a larger 3.0 volt GOR bulb that closely replicates these scales. Normal bulb brightness punctuated by high intensity flashes every 1 1/2 seconds gives an extremely realistic rotating appearance.

G Scale   |   DCC/Power Supplies/Signals/Electronics

$31.95


Dual Litebar w/red & blue
Image displayed may not be
representative of actual product.


Dual Litebar w/red & blue

Part #: 296-1008

G-R-S Micro Liting 


Vehicle Lighting Kit -- Dual Litebar with 2 Red and 2 Blue Lenses The GRS1008 Litebar kit is designed for HO and N scale vehicle and come with roof-mounted lenses, two circuit boards and a separating siren housing. The lens colors are 2 red and 2 blue. Two clear 1.5 volt micro bulbs are included, one for each lens. Overall, the "litebar" measures 0.7"L X 0.145"W X 0.15"H. The width of the siren housing can be cut back for narrower vehicles.

A Scale   |   DCC/Power Supplies/Signals/Electronics

$45.98


2 >