Adhesives/Cleaners/Lubricants Items

< 1 3 4 5 6 7 8 9 21 22



853 Results Found





Manufacturers
Categories
Scales
Smoke Fluid 4-1/2oz
Image displayed may not be
representative of actual product.


Smoke Fluid 4-1/2oz

Part #: 160-251

Bachmann Industries 


Smoke Fluid -- 4-1/2oz 134mL

A Scale   |   Adhesives/Cleaners/Lubricants

$15.00

MSRP $15.00


HO Code 83 Snap Track 9" Straight Single
Image displayed may not be
representative of actual product.


HO Code 83 Snap Track 9" Straight Single

Part #: 150-510

Atlas Model Railroad Co. 


Atlas HO Scale 9" STRAIGHT Code 83 Each

HO Scale   |   Adhesives/Cleaners/Lubricants

$1.38

MSRP $1.55


Insta-Cure+ Gap Filling CA 1 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Gap Filling CA 1 oz.

Part #: BOB-107

Bob Smith Industries 


Insta-Cure+ Gap Filling CA 1 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


IC-Gel Insta-Cure Gel 20 grams
Image displayed may not be
representative of actual product.


IC-Gel Insta-Cure Gel 20 grams

Part #: BOB-116

Bob Smith Industries 


IC-Gel Insta-Cure Gel 20 grams

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


Insta-Flex+ Clear Medium Rubber CA 1 oz.
Image displayed may not be
representative of actual product.


Insta-Flex+ Clear Medium Rubber CA 1 oz.

Part #: BOB-120

Bob Smith Industries 


Insta-Flex+ Clear Rubber CA 1 oz. Insta-Flex+â„¢ clear rubber toughened has similar qualities to our black IC-2000â„¢ but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000â„¢ that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+â„¢ has this carbon removed, its strength is a little less than IC-2000â„¢ but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX+â„¢ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEXâ„¢ and INSTA-FLEX+â„¢ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CA's provide superior shock resistent bonds.

A Scale   |   Adhesives/Cleaners/Lubricants

$8.99

MSRP $8.99


Super-Gold+ Odorless CA 1/2 oz.
Image displayed may not be
representative of actual product.


Super-Gold+ Odorless CA 1/2 oz.

Part #: BOB-126

Bob Smith Industries 


Super-Gold+ Odorless CA 1/2 oz. SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

A Scale   |   Adhesives/Cleaners/Lubricants

$8.99

MSRP $8.99


Insta-Cure+ Pocket CA 3/4 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Pocket CA 3/4 oz.

Part #: BOB-133

Bob Smith Industries 


Insta-Cure+ Pocket CA 3/4 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$4.99

MSRP $4.99


Mid-Cure 15 Minute Epoxy 4.5 oz.
Image displayed may not be
representative of actual product.


Mid-Cure 15 Minute Epoxy 4.5 oz.

Part #: BOB-203

Bob Smith Industries 


Mid-Cure 15 Minute Epoxy 4.5 oz. MID-CUREâ„¢ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CUREâ„¢ in most applications. MID-CUREâ„¢ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

A Scale   |   Adhesives/Cleaners/Lubricants

$11.99

MSRP $11.99


Gear Lubricant
Image displayed may not be
representative of actual product.


Gear Lubricant

Part #: 150-190

Atlas Model Railroad Co. 


Atlas Gear Lubricant

A Scale   |   Adhesives/Cleaners/Lubricants

$12.95


Heavy-Duty Motor Bearing Lube, .5oz
Image displayed may not be
representative of actual product.


Heavy-Duty Motor Bearing Lube, .5oz

Part #: 150-191

Atlas Model Railroad Co. 


Heavy-Duty Motor Bearing Lube, .5oz

A Scale   |   Adhesives/Cleaners/Lubricants

$15.95


Conducta-Lube/Cleaner
Image displayed may not be
representative of actual product.


Conducta-Lube/Cleaner

Part #: 150-192

Atlas Model Railroad Co. 


Atlas Conducta Lube Cleaner

A Scale   |   Adhesives/Cleaners/Lubricants

$15.95

MSRP $15.95


Smoke Fluid Unscented 1/4oz
Image displayed may not be
representative of actual product.


Smoke Fluid Unscented 1/4oz

Part #: 187-1003

Broadway Limited Imports 


Smoke Fluid -- Unscented 1/4oz 7.4mL Each

A Scale   |   Adhesives/Cleaners/Lubricants

$2.99

MSRP $2.99


Touch N Flow Applicator
Image displayed may not be
representative of actual product.


Touch N Flow Applicator

Part #: 232-711

Creations Unlimited 


Touch N Flow Applicator

A Scale   |   Adhesives/Cleaners/Lubricants

$7.99

MSRP $7.99


NLGI #2 PTFE Grease 1/2oz
Image displayed may not be
representative of actual product.


NLGI #2 PTFE Grease 1/2oz

Part #: 242-2222

Excelle Lubricants 


XL NLGI PTFE Grease 2 -- 1/2oz 15mL

A Scale   |   Adhesives/Cleaners/Lubricants

$7.49

MSRP $7.49


Pliobond Adhesive 3oz
Image displayed may not be
representative of actual product.


Pliobond Adhesive 3oz

Part #: 256-49101

Micro Engineering 


Pliobond Adhesive - Bottle w/Brush Top -- 3oz 88.7mL

A Scale   |   Adhesives/Cleaners/Lubricants

$9.35

MSRP $9.35


Super Expert Cement 25g
Image displayed may not be
representative of actual product.


Super Expert Cement 25g

Part #: 272-170490

Faller GMbH 


Super EXPERT Cement -- .9oz 25g

A Scale   |   Adhesives/Cleaners/Lubricants

$5.00

MSRP $5.00


Super Jet Adhesive 1/2oz
Image displayed may not be
representative of actual product.


Super Jet Adhesive 1/2oz

Part #: 289-767

CGM Enterprises 


Super Jet(TM) Adhesive -- 1/2oz 14.8mL Bottle

A Scale   |   Adhesives/Cleaners/Lubricants

$5.19

MSRP $5.19


Track Conditioner w/Pads
Image displayed may not be
representative of actual product.


Track Conditioner w/Pads

Part #: 430-105

Labelle Industries 


Track Conditioner w/Pads -- 1/2oz 14.8mL

A Scale   |   Adhesives/Cleaners/Lubricants

$11.39

MSRP $11.39


Plastic Compatible Grease w/Teflon
Image displayed may not be
representative of actual product.


Plastic Compatible Grease w/Teflon

Part #: 430-106

Labelle Industries 


Plastic Compatible Grease w/PTFE -- 1/2oz 14.8mL

A Scale   |   Adhesives/Cleaners/Lubricants

$9.69

MSRP $9.69


Micro-Fine Powdered Lubricant w/PTFE
Image displayed may not be
representative of actual product.


Micro-Fine Powdered Lubricant w/PTFE

Part #: 430-134

Labelle Industries 


Micro-Fine Powdered Lubricant w/PTFE

A Scale   |   Adhesives/Cleaners/Lubricants

$9.69

MSRP $9.69


RailTracker Cleaning Kit
Image displayed may not be
representative of actual product.


RailTracker Cleaning Kit

Part #: 785-4550

Woodland Scenics Co. 


Rail Tracker(TM) Cleaning Kit - Tidy Track(TM)

A Scale   |   Adhesives/Cleaners/Lubricants

$31.48

MSRP $34.99


Maintenance Pads 2/Pkg
Image displayed may not be
representative of actual product.


Maintenance Pads 2/Pkg

Part #: 785-4552

Woodland Scenics Co. 


Tidy Track(TM) Maintenance Product -- Maintenance Pads Cleaning Pad Replacement pkg(2)

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


Dust Monkeys - HO Scale 4/pk
Image displayed may not be
representative of actual product.


Dust Monkeys - HO Scale 4/pk

Part #: 785-4571

Woodland Scenics Co. 


Dust Monkeys(TM) Axle-Mounted Track Cleaner Pads -- Tidy Track(TM) pkg(4) HO Scale

HO Scale   |   Adhesives/Cleaners/Lubricants

$10.99

MSRP $24.99


Rail Cleaner Abrasive
Image displayed may not be
representative of actual product.


Rail Cleaner Abrasive

Part #: 552-PL41

Peco (Pritchard Patent Products) 


Abrasive Rubber Block Rail/Track Cleaner

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


ABS Angle 3/16x24" 5/pk
Image displayed may not be
representative of actual product.


ABS Angle 3/16x24" 5/pk

Part #: 570-90005

Plastruct Inc. 


Angle -- 3/16 x 24"

A Scale   |   Adhesives/Cleaners/Lubricants

$10.20

MSRP $10.20


ABS Angle 3/pk
Image displayed may not be
representative of actual product.


ABS Angle 3/pk

Part #: 570-90008

Plastruct Inc. 


Angle -- 3/8 x 24" 1 x 61cm pkg(3)

A Scale   |   Adhesives/Cleaners/Lubricants

$9.60

MSRP $9.60


ABS I Beam 5/pk
Image displayed may not be
representative of actual product.


ABS I Beam 5/pk

Part #: 570-90024

Plastruct Inc. 


ABS I Beam -- 3/16 x 24" .48 x 61cm pkg(5)

A Scale   |   Adhesives/Cleaners/Lubricants

$10.20

MSRP $10.20


ABS Truss 2/pk
Image displayed may not be
representative of actual product.


ABS Truss 2/pk

Part #: 570-90404

Plastruct Inc. 


ABS Open Web Truss, Warren Style pkg(2) -- 3/8 x 6"

A Scale   |   Adhesives/Cleaners/Lubricants

$9.65

MSRP $9.65


ABS Truss 2/pk
Image displayed may not be
representative of actual product.


ABS Truss 2/pk

Part #: 570-90408

Plastruct Inc. 


ABS Open Web Truss, Warren Style 2 -- 1 x 12"

A Scale   |   Adhesives/Cleaners/Lubricants

$14.35

MSRP $14.35


1 Flange Truss 3/16" 2/pk
Image displayed may not be
representative of actual product.


1 Flange Truss 3/16" 2/pk

Part #: 570-90412

Plastruct Inc. 


ABS Open Web Truss, Warren Style 1 -- 3/16 x 3" .5 x 7.6cm pkg(2)

A Scale   |   Adhesives/Cleaners/Lubricants

$10.50

MSRP $10.50


1 Flange Truss 9/32" 2/pk
Image displayed may not be
representative of actual product.


1 Flange Truss 9/32" 2/pk

Part #: 570-90413

Plastruct Inc. 


ABS Open Web Truss, Warren Style 1 -- 9/32 x 5" .7 x 12.7cm pkg(2)

A Scale   |   Adhesives/Cleaners/Lubricants

$11.10

MSRP $11.10


ABS Ladder 2/pk
Image displayed may not be
representative of actual product.


ABS Ladder 2/pk

Part #: 570-90422

Plastruct Inc. 


ABS Ladder -- HO Scale 5" Long

HO Scale   |   Adhesives/Cleaners/Lubricants

$4.40

MSRP $4.40


O Scale Ladder & Cage
Image displayed may not be
representative of actual product.


O Scale Ladder & Cage

Part #: 570-90432

Plastruct Inc. 


ABS Ladder w/Safety Cage -- 12" Length

O Scale   |   Adhesives/Cleaners/Lubricants

$11.00

MSRP $11.00


Fluorescent Rod 5/pk
Image displayed may not be
representative of actual product.


Fluorescent Rod 5/pk

Part #: 570-90254

Plastruct Inc. 


Fluorescent Acrylic Rods - Blue -- 5/32 x 10" Long pkg(5)

A Scale   |   Adhesives/Cleaners/Lubricants

$9.60

MSRP $9.60


Clear Acrylic Rod 20/pk
Image displayed may not be
representative of actual product.


Clear Acrylic Rod 20/pk

Part #: 570-90293

Plastruct Inc. 


Acrylic Rod -- 3/16 x 8-1/2" Long .5 x 21.5cm Long pkg(20)

A Scale   |   Adhesives/Cleaners/Lubricants

$10.75

MSRP $10.75


ABS Tee 7/pk
Image displayed may not be
representative of actual product.


ABS Tee 7/pk

Part #: 570-90084

Plastruct Inc. 


ABS Tee -- 1/8 x 15"

A Scale   |   Adhesives/Cleaners/Lubricants

$10.20

MSRP $10.20


ABS Tee 5/pk
Image displayed may not be
representative of actual product.


ABS Tee 5/pk

Part #: 570-90085

Plastruct Inc. 


ABS Tee -- 3/16 x 24"

A Scale   |   Adhesives/Cleaners/Lubricants

$10.75

MSRP $10.75


Butyrate Coated Wire 1/16x15" 12/pk
Image displayed may not be
representative of actual product.


Butyrate Coated Wire 1/16x15" 12/pk

Part #: 570-90102

Plastruct Inc. 


Butyrate Round Tubing -- 1/16 x 15"

A Scale   |   Adhesives/Cleaners/Lubricants

$10.50

MSRP $10.50


Styrene I-Beam 3/16 x 24" 5/pk
Image displayed may not be
representative of actual product.


Styrene I-Beam 3/16 x 24" 5/pk

Part #: 570-90515

Plastruct Inc. 


Styrene Structural Shapes - I-Beams -- 3/16 x 24" Long pkg(5)

A Scale   |   Adhesives/Cleaners/Lubricants

$8.10

MSRP $8.10


Styrene I-Beam 5/16 x 24"  4/pk
Image displayed may not be
representative of actual product.


Styrene I-Beam 5/16 x 24" 4/pk

Part #: 570-90517

Plastruct Inc. 


Styrene Structural Shapes - I-Beams -- 5/16 x 24" Long pkg(4)

A Scale   |   Adhesives/Cleaners/Lubricants

$8.80

MSRP $8.80


< 1 3 4 5 6 7 8 9 21 22